| Click to Download Updated Tracking Index | |||
| Intro | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | Builders Advisory & Instruction Manual | Approved | 8/1/10 |
| 93-AS-0419-II | Tornado II & S Orthographic Assembly | Approved | 8/1/10 |
| 93-AS-0419-SS | Tornado SS Orthographic Assembly | Approved | 8/1/10 |
| 92-AS-0136-A | Tornado II, S, & SS Parts Callout | Approved | 8/1/10 |
| 92-AS-0137-A | Tornado II, S, & SS Parts List | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Fuselage | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | Two Place Assembly | Approved | 8/1/10 |
| 92-INS-0176-C | Nose Fork Assembly Instructions | Approved | 8/1/10 |
| 92-INS-0178-D | Spindle and Brake Assembly | Approved | 8/1/10 |
| 92-INS-0181-F | Anti Servo Control Assembly | Approved | 8/1/10 |
| 92-INS-0182-C | Tail Boom Assembly and Alignment | Approved | 8/1/10 |
| 92-INS-0183-D | Vertical and Strake Assembly | Approved | 8/1/10 |
| 92-INS-0184-E | Stabilator Assembly | Approved | 8/1/10 |
| 92-INS-0185-E | Stabilator Mounting Instructions | Approved | 8/1/10 |
| 92-INS-0187-B | Anti Servo Push/Pull Rod Assembly | Approved | 8/1/10 |
| 92-INS-0188-D | Anti Servo Tab Assembly | Approved | 8/1/10 |
| 92-INS-0195-B | Tailwheel Mounting Instructions | Approved | 8/1/10 |
| 92-INS-0226-D | Trimwheel Assembly Procedures | Approved | 8/1/10 |
| 92-INS-0227-D | Trimwheel Installation | Approved | 8/1/10 |
| 92-INS-0228-C | Trimwheel Installation | Approved | 8/1/10 |
| 92-INS-0231-C | Aft Throttle Handle Assembly | Approved | 8/1/10 |
| 92-INS-0233-D | Forward Throttle Handle Assembly | Approved | 8/1/10 |
| 92-INS-0236-F | Fuselage Cable Routing | Approved | 8/1/10 |
| 92-INS-0237-B | Flap Detent Strip Installation | Approved | 8/1/10 |
| 92-INS-0238-A | Rudder Cable Installation | Approved | 8/1/10 |
| 92-INS-0239-A | Cable Guide Installation | Approved | 8/1/10 |
| 92-INS-0241-C | Door Latch Assembly | Approved | 8/1/10 |
| 92-INS-0243-C | Rear Door Latch Assembly | Approved | 8/1/10 |
| 92-DT-0248-C | 503 Wiring Diagram | Approved | 8/1/10 |
| 92-DT-0251-A | Mag Switch Pinout and Wiring Diagram | Approved | 8/1/10 |
| 92-INS-0252-B | Fuel Tank Mount Installation | Approved | 8/1/10 |
| 92-INS-0254-B | Aft Belly Skin Installation | Approved | 8/1/10 |
| 92-INS-0255-B | Forward Belly Skin Instructions | Approved | 8/1/10 |
| 92-INS-0256-D | Mounting Engine to Fuselage | Approved | 8/1/10 |
| 92-INS-0266-E | Instrument Panel Installation | Approved | 8/1/10 |
| 92-INS-0269-C | Nose Cone Installation | Approved | 8/1/10 |
| 92-INS-0271-C | Swing Arm Installation | Approved | 8/1/10 |
| 92-INS-0272-F | Gear Leg Assembly | Approved | 8/1/10 |
| 92-INS-0273-E | Aft Brake and Rudder Pedal Assembly | Approved | 8/1/10 |
| 92-INS-0274-D | Rudder Pedal Assembly Instructions | Approved | 8/1/10 |
| 92-INS-0312-B | Stits Layout | Approved | 8/1/10 |
| 92-INS-0313-B | Left Window Installation | Approved | 8/1/10 |
| 92-INS-0314-C | Upper Right Window Installation | Approved | 8/1/10 |
| 92-INS-0316-C | Front Door Installation | Approved | 8/1/10 |
| 92-INS-0318-C | Rear Door Installation | Approved | 8/1/10 |
| 92-INS-0320-B | Wing Gap Seal Installation | Approved | 8/1/10 |
| 92-INS-0321-C | Mounting Wing to Fuselage | Approved | 8/1/10 |
| 92-INS-0322-A | Cable Tunnel and Aluminum Gap Seal Installation | Approved | 8/1/10 |
| 92-INS-0331-B | Landing Gear Installation | Approved | 8/1/10 |
| 92-INS-0332-C | Nosewheel Installation | Approved | 8/1/10 |
| 93-INS-0334-C | Forward Brake Pedal Assembly | Approved | 8/1/10 |
| 93-INS-0343-B | Pull Rope Guide Installation | Approved | 8/1/10 |
| 93-DT-0366-C | Wiring Diagram | Approved | 8/1/10 |
| 95-INS-0503-E | Control Stick Assembly | Approved | 8/1/10 |
| 95-INS-0516-E | Horizontal Push/Pull Installation | Approved | 8/1/10 |
| 96-INS-0678-B | Fwd Throttle Handle Assembly | Approved | 8/1/10 |
| 96-INS-0681-D | Aft Throttle Handle Assembly | Approved | 8/1/10 |
| 96-INS-0756-C | Main Aileron Push/Pull Tube Installation | Approved | 8/1/10 |
| 96-INS-0758-B | Setting Horizontal Push/Pull | Approved | 8/1/10 |
| 96-INS-0786-A | Fuel Line Routing for 10 Gallon Tank | Approved | 8/1/10 |
| 97-INS-0842-D | Fuel System for Extended Range Tank | Approved | 8/1/10 |
| 98-INS-0966-A | Lap and Shoulder Harness Installation | Approved | 8/1/10 |
| 98-INS-0970-D | Anti Servo Control Rod Slots | Approved | 8/1/10 |
| 01-INS-1156-A | Matco Brake Installation | Approved | 8/1/10 |
| 01-INS-1159-A | Matco Hydraulic Brake Assembly | Approved | 8/1/10 |
| 01-INS-1238-E | 8' Stabilator Structure | Approved | 8/1/10 |
| 01-INS-1239-D | 8' Anti Servo Tab Installation | Approved | 8/1/10 |
| 01-INS-1240-A | Control Stick Assembly | Approved | 8/1/10 |
| 01-INS-1241-B | Rudder Installation | Approved | 8/1/10 |
| 01-INS-1242-B | Rudder Pedal Assembly Instructions | Approved | 8/1/10 |
| 01-INS-1244-C | Hydraulic Brake Pedal Assembly | Approved | 8/1/10 |
| 01-INS-1255-A | Rear Hydraulic Brake Pedal Assembly | Approved | 8/1/10 |
| 01-INS-1256-B | Aileron Linkage | Approved | 8/1/10 |
| 01-INS-1297-B | Stabilator Mounting Instructions | Approved | 8/1/10 |
| 01-INS-1298-A | Front Door Prop Assembly | Approved | 8/1/10 |
| 01-INS-1299-A | Door Prop Assembly Installation | Approved | 8/1/10 |
| 01-INS-1313-D | 8' Stabilator Skin | Approved | 8/1/10 |
| 02-INS-1376-C | Main Aileron Push/Pull Tube Assembly | Approved | 8/1/10 |
| 02-INS-1377-B | Main Aileron Push/Pull Tube Assembly | Approved | 8/1/10 |
| 02-INS-1379-A | 15 Gallon Fuel Tank | Approved | 8/1/10 |
| 02-INS-1380-A | 15 Gallon Fuel Tank | Approved | 8/1/10 |
| 03-INS-1391-C | Tornado S Fuel Tank Installation | Preliminary | 8/1/10 |
| 05-INS-1432-A | Fiberglass Panel Installation | Approved | 8/1/10 |
| 05-INS-1433-A | SS Gear Leg Assembly | Approved | 8/1/10 |
| 05-INS-1434-A | Setting Horizontal Push/Pull Tube | Approved | 8/1/10 |
| 05-INS-1435-A | Aft Belly Skin Installation | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Wing | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | Wing Assembly 23.5' | Approved | 8/1/10 |
| - | Wing Assembly 26' | Approved | 8/1/10 |
| 92-INS-0218-C | Inspection Hole Layout | Approved | 8/1/10 |
| 92-INS-0232-F | Intermediate Soar Web Installation | Approved | 8/1/10 |
| 92-INS-0242-B | Flap Handle Installation | Approved | 8/1/10 |
| 92-INS-0258-D | Aileron Assembly | Approved | 8/1/10 |
| 92-INS-0261-E | Flap Hinge Installation | Approved | 8/1/10 |
| 92-INS-0262-C | Aileron Installation | Approved | 8/1/10 |
| 92-INS-0263-B | Flap Installation | Approved | 8/1/10 |
| 92-INS-0264-E | Wingtip Rib Installation | Approved | 8/1/10 |
| 92-INS-0265-C | Left Wingtip Installation | Approved | 8/1/10 |
| 92-INS-0324-G | Rib and Hat Section Layout | Approved | 8/1/10 |
| 92-INS-0325-D | Aileron Control System Layout | Approved | 8/1/10 |
| 92-INS-0326-C | Flap Control System Assembly | Approved | 8/1/10 |
| 92-INS-0327-D | Hat Section and Rear Spar Layout | Approved | 8/1/10 |
| 92-INS-0328-C | Wing Skin Installation | Approved | 8/1/10 |
| 92-INS-0329-B | Setting Wing Washout | Approved | 8/1/10 |
| 95-INS-0593-D | Electric Flap Motor Mounting | Approved | 8/1/10 |
| 95-INS-0595-F | Motorized Flap Control System | Approved | 8/1/10 |
| 95-INS-0603-B | Wing Skin Installation | Approved | 8/1/10 |
| 96-INS-0635-E | Aft Spar Assembly Instructions | Approved | 8/1/10 |
| 96-INS-0701-B | Aileron Control System Layout | Approved | 8/1/10 |
| 96-INS-0703-E | Hat Section and Aft Spar Layout | Approved | 8/1/10 |
| 96-INS-0704-A | Rib & Hat Section Layout | Approved | 8/1/10 |
| 96-INS-0705-D | Rib & Hat Section Layout | Approved | 8/1/10 |
| 96-INS-0706-A | Inspection Hole Layout | Approved | 8/1/10 |
| 96-INS-0707-C | Inspection Hole Layout | Approved | 8/1/10 |
| 96-INS-0710-E | 81 1/4" Flap Hinge Installation | Approved | 8/1/10 |
| 96-INS-0749-D | Hinge Doubler Installation | Approved | 8/1/10 |
| 96-INS-0759-A | Templates | Approved | 8/1/10 |
| 96-INS-0779-B | .016 Wing Rib Preparation | Approved | 8/1/10 |
| 96-INS-0780-E | D-Cell Drilling Procedure | Approved | 8/1/10 |
| 96-INS-0784-A | Wing Skin Rivet Pattern Templates | Approved | 8/1/10 |
| 97-INS-0878-D | Hinge Doubler Installation | Approved | 8/1/10 |
| 97-INS-0904-B | Aileron & Flap Drooping & Finishing | Approved | 8/1/10 |
| 97-INS-0923-A | Switch Wiring Diagram w/ Electric Brake | Approved | 8/1/10 |
| 01-INS-1153-B | Aft Spar Hinge Doubler Layout | Approved | 8/1/10 |
| 01-INS-1155-B | Aft Spar Hinge Doubler Layout | Approved | 8/1/10 |
| 01-INS-1229-C | Inspection Hole Layout | Approved | 8/1/10 |
| 01-INS-1234-B | Internal Fuel Line Routing | Preliminary | 8/1/10 |
| 01-INS-1245-A | Aileron Control System Layout | Approved | 8/1/10 |
| 01-INS-1247-B | Flap & Aileron Templates | Approved | 8/1/10 |
| 01-INS-1248-B | Rib & Hat Section Layout | Approved | 8/1/10 |
| 01-INS-1282-B | Intermediate Shaft & Linkage | Approved | 8/1/10 |
| 01-INS-1286-A | Center Section Rib Installation | Approved | 8/1/10 |
| 05-INS-1438-C | Rib & Hat Section Layout | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Preflight | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | Preflight | Approved | 8/1/10 |
| - | Preflight Checklist | Approved | 8/1/10 |
| 93-INS-0339-B | Tornado II Weight and Balance | Approved | 8/1/10 |
| 02-INS-1375-A | Tornado S Weight and Balance | Approved | 8/1/10 |
| 06-INS-1443-A | Tornado SS Weight and Balance | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Aircraft Maintenance | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | Aircraft Checklist | Approved | 8/1/10 |
| - | Aircraft Maintenance | Approved | 8/1/10 |
| - | Engine Run Up Log | Approved | 8/1/10 |
| - | Aircraft Statistics | Approved | 8/1/10 |
| - | Maintenance Schedule | Approved | 8/1/10 |
| - | Aircraft Repair Log | Approved | 8/1/10 |
| - | Engine Repair Log | Approved | 8/1/10 |
| - | Propeller Repair Log | Approved | 8/1/10 |
| - | Annual Inspection | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Hardware & Cables | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| 92-INS-0192-B | Cable Mounting Details | Approved | 8/1/10 |
| 92-INS-0198-A | Hardware Identification | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| FAA Advisory Circular | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | AC 20-27G | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| FAR Part 103 & USUA Information | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| - | FAR Part 103 | Approved | 8/1/10 |
| - | USUA Information | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Options | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| 92-INS-0270-C | Rear Seat Installation | Approved | 8/1/10 |
| 93-INS-0418-C | Nose Cone Vent Installation | Approved | 8/1/10 |
| 94-INS-0422-C | Forward Tank Mount Installation | Approved | 8/1/10 |
| 94-INS-0423-C | Aft Tank Mount Installation | Approved | 8/1/10 |
| 95-INS-0558-A | Exhaust System | Approved | 8/1/10 |
| 95-INS-0560-A | Oil Inspection System | Approved | 8/1/10 |
| 96-INS-0634-F | Spring Controlled Steering Option | Approved | 8/1/10 |
| 96-INS-0643-B | 912 Oil Cooler Installation | Approved | 8/1/10 |
| 96-INS-0653-G | 912 Dynafocal Mounting Instructions | Approved | 8/1/10 |
| 96-INS-0654-A | Wing Tip Landing Light System | Approved | 8/1/10 |
| 96-INS-0741-D | Extended Range Fuel Tank Installation | Approved | 8/1/10 |
| 96-INS-0748-D | Stabilator Secondary Counterweight Installation | Approved | 8/1/10 |
| 96-INS-0766-A | Left Window w/ Removable Window Installation | Approved | 8/1/10 |
| 96-INS-0767-A | Front Door w/ Removable Window Installation | Approved | 8/1/10 |
| 96-INS-0768-A | Horizontal Endcap Installation | Approved | 8/1/10 |
| 96-INS-0769-A | Vertical/Rudder End Cap Installation | Approved | 8/1/10 |
| 96-INS-0788-C | 582 Wiring Diagram | Approved | 8/1/10 |
| 96-INS-0796-B | F-30 Engine Mount Installation | Approved | 8/1/10 |
| 97-INS-0813-E | Spade Installation | Approved | 8/1/10 |
| 97-INS-0814-A | Snapvent Installation | Approved | 8/1/10 |
| 97-INS-0836-E | Rotax 2-Stroke Engine Mounts | Approved | 8/1/10 |
| 97-INS-0842-D | Fuel System for Extended Range Tank | Approved | 8/1/10 |
| 97-INS-0860-B | Retro-fit Electric Flaps Installation | Approved | 8/1/10 |
| 97-INS-0865-A | Landing Gear Fairings Installation | Approved | 8/1/10 |
| 97-INS-0875-B | Nose Fork Wheel Pant Installation | Approved | 8/1/10 |
| 97-INS-0893-C | Deluxe Wheel Pant Parts Preparation | Approved | 8/1/10 |
| 97-INS-0930-D | 912 Oil System and Radiator Installation | Approved | 8/1/10 |
| 97-INS-0936-B | Removable Nose Cone Installation | Approved | 8/1/10 |
| 98-AS-0972-E | Electric Flap System & Trim Sensor | Preliminary | 8/1/10 |
| 98-AS-0987-C | Trim Motor Mount Assembly | Preliminary | 8/1/10 |
| 99-INS-1032-C | 912 Wiring Diagram | Approved | 8/1/10 |
| 99-INS-1045-C | 912 Muffler Installation | Approved | 8/1/10 |
| 00-INS-1064-B | A413 Power Supply | Approved | 8/1/10 |
| 01-INS-1235-A | Fuel Selector Cover Layout | Approved | 8/1/10 |
| 02-INS-1366-A | Landing Gear Fairings Ins. for Hyd. Brakes | Approved | 8/1/10 |
| 06-INS-1442-A | Rudder Aluminum Skin Installation | Approved | 8/1/10 |
| 10-INS-1465-A | Luggage Pod Installation | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
| Click to Download Updated Tracking Index | |||
| Supplemental | |||
| Drawing No. | Detail Name | Drawing Status | Release Date |
| 95-INS-0576-B | 912 Choke and Throttle Installation | Approved | 8/1/10 |
| 95-INS-0592-C | Choke Cable Merge Mounting | Approved | 8/1/10 |
| 96-INS-0643-B | 912 Oil Cooler Installation | Approved | 8/1/10 |
| 96-DT-0675-B | 912 Tornado II Wiring Diagram | Approved | 8/1/10 |
| 96-INS-0744-C | 912 Radiator Installation | Approved | 8/1/10 |
| 96-INS-0745-B | Wind Screen Bow Adjustment | Approved | 8/1/10 |
| 96-INS-0764-C | Rear Wing Mount Inspection Notice | Approved | 8/1/10 |
| 97-INS-0892-A | Leading Repair Procedure | Approved | 8/1/10 |
| 98-INS-0959-E | Aft Throttle Handle Assembly | Approved | 8/1/10 |
| 98-INS-0962-A | BRS Mount Bracket Installation | Approved | 8/1/10 |
| 00-INS-1069-C | 15 Gallon Fuel Tank | Approved | 8/1/10 |
| 00-INS-1071-B | 15 Gallon Fuel Tank | Approved | 8/1/10 |
| 01-INS-1243-A | Gear Leg Assembly | Approved | 8/1/10 |
| 01-INS-1249-A | Setting Wing Washout | Approved | 8/1/10 |
| 01-INS-1250-B | Setting Horizontal Push/Pull | Approved | 8/1/10 |
| 01-INS-1254-B | Kevlar Panel Installation | Approved | 8/1/10 |
| 01-INS-1269-A | Main Control Guide Installation | Approved | 8/1/10 |
| 02-INS-1368-C | Aileron Counterweight Stiffener Ins. | Approved | 8/1/10 |
| 10-INS-1466-A | Stabilator Main Spar Area Plate Installation | Approved | 8/1/10 |
| 10-INS-1469-A | Rotax 912 Engine Mount Brace Installation | Approved | 8/1/10 |
| All documents are proprietary to Titan Aircraft and are protected by international copyright laws and are not to be used, circulated, reproduced, copied, or disclosed in any manner without prior written permission of an authorized official of Titan Aircraft. |
Search the manual by Part Numbers, Drawing Numbers, or by name.
| DrawingNumber | Name | Parts Used |
|---|